Vol. 18 July Issue
Year 2017




Advanced Stress Testing Technology For Shot Peened Surfaces

An interview with Dominik Dapprich, Managing Director of Stresstech GmbH - Residual stress measurement and microstructure testing tools since 1999.

Never Stop Improving

When discussing blast cleaning and shot peening, the focus has traditionally been greater on the equipment and less on the process and inputs that validate the process. Those familiar with the process will agree that a key input for both blast cleaning and shot peening is the "tool" (media), and Ervin's manufacturing facilities personify this fact. Starting from sorting and selecting the right mix of steel scrap for the furnace, to melting, pouring, thermal treatment, screening and packaging, these ISO 14001:2004 facilities never fail to fascinate both discerning technical and astute commercial minds. The attention to detail is obvious in every part of the manufacturing process. Joe McGreal, VP of Sales and Marketing at Ervin Industries explains that, "the company's quality standards exceed the requirements of SAE & AMS and every ton of cast steel shot is closely monitored through every process to achieve the highest quality". Ervin’s loyal and growing customer base relies on the repeatability and accuracy of their cleaning or peening operations and it’s critical that we deliver on this promise cycle after cycle". This sums up the company's dynamic vision in very simple and tangible terms. The MFN team met with Mr. McGreal to learn more about Ervin, its 97-year old legacy and vision for the future.

Cover Page

Eider Barrage Refurbishment Project With Phenics

Science Update

Key Factors on Cavitation Peening

Author: Hitoshi Soyama (Dr. Eng.) Professor

Shot Peening in the Automotive Industry

New Combinations Of Shot Peening And Nitriding

Author: Mario Guagliano

Good Vibrations

Wash Me, But Do Not Make Me Wet – Surface Finishing With Extreme Requirements

Author: Mathieu Geuting

MFN Trainer Column

Where Does Laser Peening Fit In The Metal Finishing Process?

Author: David Lahrman

Off the Beaten Track

The Antikythera Mechanism

Author: Giovanni Gregorat

From Editor's Desk

Do you have patience?

Author: Andrzej Wojtas


Integration-Ready: A New Entry-Level "Continuous Through-Feed" Blast Machine

Cobranding & Local Manufacture To Improve Product Competitiveness

New MFN Trainer in Singapore

Surface Finishing For implants. Mirror Finish For Medical Implants.

Formaldehyde – Road Closed

The Pangborn Group Selects Roger Stonecipher as New President

Increased system operation efficiency with digital documentation. All Information Close At Hand In A Matter Of Seconds With EcoDocu.