E-Archive


Vol. 21
May Issue
Year 2020
BACK

Articles


in Vol. 21 - May Issue - Year 2020
The Group Grows Through Production Technology For Electric Vehicles



Duerr painting robots


Duerr electrode coating


Schenck centrio schleuderstand


Schenck eteno

 In the Spotlight

The Dürr Group is one of the world's leading mechanical and plant engineering firms with extensive expertise in automation and digitization/Industry 4.0. Its products, systems and services enable highly efficient manufacturing processes in different industries. The Dürr Group supplies sectors like the automotive industry, mechanical engineering, chemical, pharmaceutical and woodworking industries. It generated sales of € 3.92 billion in 2019. The company has around 16,500 employees and 112 business locations in 34 countries. The Group operates in the market with the brands Dürr, Schenck and HOMAG and with five divisions: Paint and Final Assembly Systems: paint shops as well as final assembly, testing and filling technology for the automotive industry Application Technology: robot technologies for the automated application of paint, sealants and adhesives Clean Technology Systems: air pollution control, noise abatement systems and battery coating lines Measuring and Process Systems: balancing equipment and diagnostic technology Woodworking Machinery and Systems: machinery and equipment for the woodworking industry

The automotive industry is investing large sums in electromobility. In doing so, it is focusing not only on developing battery-powered cars but also on equipping its plants with modern production technology. This provides an opportunity for the Dürr Group: In 2019, incoming orders relating to e-mobility production technology increased by 44% to € 390 million. Aside from well-established OEMs, customers also include many new manufacturers of battery vehicles.

In 2030, around 60% of all new cars will have an alternative drive system. This amounts to a good 70 million cars, compared to 14 million in 2020. The majority of them will be powered by electricity. E-mobility is on the cusp of strong growth, in which the Dürr Group will participate as a technology partner. 

Thanks to electromobility, the customer base of the mechanical and plant engineering firm is expanding. New carmakers are emerging, particularly in China and the United States, that have no experience of producing conventional cars but are keen to gain market share with battery-powered vehicles. In 2019, over 20 such e-pioneers ordered production technology from Dürr. In order to mass-produce their cars, they first need the necessary factories. "With our experience, we are the right partner for them. We offer a broad technology range and can provide comprehensive advice to e-mobility players in building their production base", says Ralf W. Dieter, CEO of Dürr AG. 

China is the largest market for electric cars. This year, Dürr has already received a large order there for the construction of a paint shop for battery cars. Demand has also picked up in other regions. In the United States, Dürr received three large paint systems orders from e-mobility manufacturers in the second half of 2019. 

Whether the customer is an EV startup or an established automotive group – what is important in most cases is that the paint shop be scalable. This means that, in the initial stage, customers often order paint systems for smaller unit numbers. However, the plant must be expandable by modules, thus enabling customers to install additional capacity quickly when sales figures increase. "Scalability is an important pacemaker in our innovation management. We develop specific products and systems to ensure that customers’ production capacity can grow in line with the market success of their products", says Dr. Jochen Weyrauch, who is responsible for paint systems business on the Dürr AG Board of Management. 

Broad range for the final assembly of battery cars 

In addition to paint systems, the Dürr Group also offers other technologies for the production of electric vehicles – in final assembly, for instance. Since electric vehicles have a less complex power train than their conventional counterparts, their assembly allows for a higher level of automation. Dürr has already installed automated assembly systems for renowned manufacturers of battery cars. Demand is likely to grow as unit numbers in electric vehicle production increase. 

One important stage in the assembly of electrically powered vehicles is the "marriage" stage. This is where the battery is fixed to the underbody using Dürr technology – computer-controlled and with up to 36 bolts, which are delivered to the bolt holes fully automatically. The Group also offers systems for filling batteries with refrigerants. This ensures that the batteries do not get too warm and can achieve their maximum range. Dürr’s filling technology is used, e.g., for the StreetScooter, the electric delivery van used by Deutsche Post.

Testing technology for fully assembled cars is also facing new challenges due to the advent of electromobility, especially when it comes to safety. Dürr’s test systems are used to ensure that the high-voltage circuits in battery-powered vehicles do not pose any risks. 

Electric motors run quietly thanks to technology by Schenck RoTec

The production of electric motors is supported by Dürr’s subsidiary Schenck RoTec through, for instance, the eTeno balancing system; this measures and corrects unbalance in electric armatures for e-drives. In addition, Schenck RoTec offers the Centrio spin test system for material testing on electric motors. This enables carmakers to determine the maximum rotation loads their motors can be exposed to.

Technology for battery production
 
To achieve greater unit numbers in electromobility, the automotive industry requires additional capacity for battery production. Here, too, the Dürr Group offers technology for various stages of manufacture. Its subsidiary, Megtec, offers a system for coating lithium-ion battery electrodes. This process is unique, since it applies the cathode and anode material onto the basic material – a metal foil – simultaneously on both sides. 

Dürr supports the manufacture of battery modules through highly precise application technology. Among its products is a coating system for the thermal and electrical insulation of battery cells (insulation can-painting). There is also a solution ‘made by Dürr’ for battery-glueing. This is where the coated battery cells are arranged next to each other and bonded into a battery module. After that, a thermal interface material (gap filler) is applied. This conducts away the heat generated during battery charging and discharging. Finally, the battery cover is glued into place.




For Information: 
Dürr Systems AG
Kristin Roth, Marketing
Carl-Benz-Str. 34
74321 Bietigheim-Bissingen, Germany
Tel. +49.7142.78 4854
Fax +49.7142.78 55 4854
E-mail: kristin.roth@durr.com 
www.durr.com